DC Manual Arc Welding Power Source

PE-series DC manual arc-welding power source adopts IGBT inverter technology. They are widely applied to weld all metal structures in container (e.g.bolier) manufacturing, power plant metallurgy, chemical, aviation/aerospace and vehicle making industries. Suitable for all kinds of acid, basic and heat-resistant steal electrodes.

• Adjustable: arc force and welding current, etc

• Welding current can be preset precisely and displayed digitally

• With suitable carbon electrode, air carbon arc gouging can be undertaken

• High efficiency arc-striking

• Protective functions: overheat, over-current, under-voltage and power phase absence, etc

• Specifications

TIG/MMA Arc Welding Power Source

PNE-series TIG/MMA arc-welding power source adopts IGBT inverter technology. They are widely used in various kinds of metal except Al, Mg and their alloy at TIG welding and are suitable for all kinds of acid and basic electrode at MMA welding.

• TIG/MMA switch function

• Adjustable: arc force, surge current, slope down time and welding current, etc.

• Welding current can be preset precisely and displayed digitally

• Wide range of welding current, and arc-stability in low current

• Remote control function

• Many kinds of program-control operation modes at TIG welding

• No-contact high frequency arc-striking at TIG welding

• Protective functions: overheat, over-current, under-voltage and power phase absence, etc

• Specifications

TIG/MMA Pulse Welding Power Source

This series TIG/MMA pulse welding power source adopts IGBT inverter technology. They are widely used in various kinds of metal except Al, Mg and their alloy at TIG welding and are suitable for all kinds of acid and basic electrode at MMA welding.

• Good consistency and stability.

• High reliability owing to automatic detecting and effective preventing function.

• Multiple adjustable parameters, accurate parameter adjusting, wide adjustable range.

• Visual and easy to operate.

• Reliable ventilation system.

• Specifications

Semi-Automatic Gas Shielded Metal-Arc Welding Machine

These semi-automatic gas shielded metal-arc welding machines adopts IGBT inverter technology, which consist of power source and wire feeder. The machine has the characteristics of stable welding process, low spatter and good weld. The molten pool is easy to be controlled, operation is simple to be done, and efficiency is high.

• Soft-start ignition

• Adjustable: arc force, crater current, crater voltage, welding current and welding voltage

• 2/4 step welding modes switch.

• Welding wires diameter Selection

• Welding voltage and welding current can be preset and displayed digitally

• Protective functions: overheat, over-current, under-voltage and power phase absence, etc.

• Specifications

AC/DC Pulse TIG/MMA Square Wave Welding Power Source

WSE-series products are multi-functional welding power source with IGBT inverter technology. They are widely used in various kinds of metal including AL, Mg and their alloy at TIG welding and are suitable for all kinds of acid and basic electrode at MMA welding.

• Multi-functions: AC square wave TIG, DC pulse TIG, DC TIG, MMA and Spot TIG welding.

• Microprocessor control technology.

• Parameters in panel are set by coordinate-type touch key; and single-knob makes the operation simple and clear.

• There are many adjustable parameters under each of the five welding states.

• All parameters under the five welding states can be stored in Memory channel.

• Protective functions: overheat, over-current and under-voltage, etc.

• Specifications