|
AUTOMATIC CONVEX LINE-MARKING MACHINE
YY-SZA-I
The
YY-SZA-I automatic convex line-marking machine finishes construction
work with one machine and forming one time convex lineation by
micro-computer system, sense system, air compression system, running
serse system .etc. The lineation that marks with regular trapezoid
convex shape, convex height, convex space, can meet the different
needs of different road, and completely conforms to the
international shake and reflection standards, and has stronger
deformation, abrasion and shock resistance .etc.
-
Engine:
Japanese Robin 6.0HP or Honda 6.5HP four-stroke air-cooled
gasoline engine.
-
Drive system: The original imported oil-pressure variable speed
transmission system has automatical brake device and flexible
operation in advance, back off or stop ( HTS).
-
Electronic controller: Set 3 standard spaces, and realize
micro-electronic intellective control. Freely adjust the convex
numbers, length, height and space according to the needs of
custom individual. The convex height: 3-7mm.
-
Drive speed: Advance 0-4km/h, back off 0-4km/h.
-
Max
climbing capability: 15°
-
Heating
materials: Petroleum liquefied gas.
-
Coating
tank: The heating tank which is made of stainless steel or cold
rolling oxidation resistant steel equips with erect type manual
agitating device. Cubage: 6.5cubic litre (about 120kg), whose
heating temperature can be freely controlled (0-230℃) according
to the different kinds of coating chosen by owners.
-
Glass
micro-beads bin: Pin with windows can check the quantity of
glass micro-beads in time, whose cubage is 15kg.
-
Glass
micro-beads broadcaster: The automatic definite quantity
broadcaster which leaves and matches synchronous with the
coating scraping system, ensures the broadcaster evener and more
economical.
-
Chassis: The firm welding frame, whose surface has been
chrome-plated or high temperature treatment. Equip with high
speed type imported bearing to ensure the whole machine more
lightsome and convenient.
-
Marking bucket: The structure plate is made of imported special
steel with fire resistance, oxidation resistance and deformation
resistance, which has better stability after punching. The
plinth is made of special alloy steel and applies the pneumatic
scrape structure. The floor knife adopts imported hard tungsten
steel knife-head. The manufacture techniques of the bucket
ensure the better sensibility, abrasion resistance and firmness,
and the convex shape of lineation more regular, the edge of
bottom line more straight, the head more perfect. The
configuration standard of bucket is 150mm.
-
Rubber wheel: The right front wheel is a special modified rubber
one with fire and abrasion resistance, which can well prevent
tackless or deformation after long high temperature effects. The
left front wheel and the back stern wheel are made of special
naturally modified rubber with abrasion resistance, whose nave
is made of refined steel. The diameter of front wheel: Ф250mm,
the diameter of back wheel: Ф 190mm.
-
Back stern wheel direction finder: Lock the direction device
which can ensure the line-marking machine freely operated in
straight or twist.
-
Guide rod: The chrome-plated device which can be freely
conducted fall and lift by handle provides convenience to adjust
up, down, left, right.
-
Handle bar: The individual design conforms to the requirements
of the human body projects. The height can be freely adjusted
according to the demands of operator.
-
Alarm function: The alarm with flexible flicker frequency which
is installed with machine largely improves the safety in
construction.
-
Heating system: a 15kg petroleum liquefied gas storage tank is
used to respectively supply gas to heating warmer in coating
tank, front and back nozzles of line-marking machine and outside
inflame gun, whose power is controlled by different values. The
valves and gas tools adopt imported parts.
-
Lineation width: Change different marking buckets with different
specifications (100,150,200,300mm) according to the needs of
projects.
-
Lineation thickness: The thickness of bottom line (1.5-2.5mm)
and the convex height (3-7mm) can be freely adjusted through
adjusting the control device of the floor knife and the convex
height.
-
Shape size and whole machine weight: 1350(length) ×910(width)
×1100(height); 237kg (not including the gas tank, with 150mm
bucket).
|
|